From jbgreen@fnal.gov Fri Jun 10 21:53:53 2005
Date: Fri, 10 Jun 2005 17:26:35 -0500
From: Johnny Green <jbgreen@fnal.gov>
To: Linda Bagby <bagby@fnal.gov>, John Foglesong <fogie@fnal.gov>,
     John Anderson <janderson@fnal.gov>, Alan L. Stone <alstone@fnal.gov>
Subject: status fabrications

Linda and Guys

1) I have received 19 of the ATC cards in house, I've given one of them 
with parts to Bruce for him to deliver them
to WH13X for assembly.
2) I have the first patch panel card in my office on the work desk that 
can be used.
I've given the approval for the assembly of the remaining 24.
3) The ATC front panels are being manufactured, I expect them by the 
6/24 or 27.
4) Rack panels are being fabricated I expect them to start shipping the 
week of July 4th.
5) The test card schematic has been designed but I need to finish the 
mechanical drawings
before the layout can begin. Schematics on my work desk`.
6) The test cable for the glenaire can be built, I've given the details 
to John F.
7) I've had the hardware for the Rack Panels ordered.
8) The cable for L0 RTD has not been ordered still pending your 
approval. (Linda)
9) There is only 1- HV Selector spare and I have it, please do not 
install until I have time to document
some of the mechanical issues. John thinks we should build 3 more.
10) Bruce ordered the parts for Ken Johns, eg. lugs.

LAST
I'll be gone until 6/20/2005 see you then.

regards

-- 
Johnny Green, Fabrications Coordinator
Fermilab
PO Box 500
Kirk and Wilson Roads
Batavia IL. 60510
ms 357
ph 630 840-3392
fx 630 840-8886